Volkswagen Accessories
– Secure left support -3- with mushroom head bolts -12-,
washers -6- and star shaped nuts -13-. The left support -3-
must fully contact the pillar trim without play.
– Secure right support -4- on right side of partition in same
manner.
– Align partition and tighten all securing points -arrows-.
– Fold back the rear seat backrest.
Note
Ensure that the rear seat backrest is locked in position correctly
and that the head restraints do not contact the partition. If nec‐
essary, re-adjust the partition at the lower securing points.
– Install luggage compartment cover.
Note
After a short drive, check all screw fastenings and retighten
♦
as necessary.
Check all screw fastenings again after appropriate periods.
♦
WARNING!
♦ The transportation of people behind the partition grille is
forbidden!
♦ The head restraints must always be set correctly accord‐
ing to the head height of the seat occupant.
♦ Always secure heavy loads with a securing strap.
3. Installing partition grille 7N0 017 221 C
5