Moving Your Appliance; Selecting The Temperature - Saivod VS1821 Manual De Instrucciones

rectly.

MOVING YOUR APPLIANCE

•
Make sure that the appliance is unplugged from the mains socket. Remove all bottles and
shelves to avoid any shock.
•
Always move the appliance vertically.
•
After moving, wait for 30 minutes before plugging in the appliance.
BEFORE FIRST USE
Remove all packaging.
Clean the inside of the appliance with warm water and little liquid detergent to remove man-
ufacturing and transportation dust.
OPERATION
Ensure that the appliance is placed on a flat and stable surface.
Plug the appliance into the mains socket. The display will show the current actual tempera-
ture of the internal cabinet
Allow the appliance to cool down for 2-3 hours before placing wine bottles in the appliance.

SELECTING THE TEMPERATURE

The temperature can be set from 11°C to 18°C.
1. Repeatedly press
• Each time you press
2. The temperature selected will flash on the display for approximately 5 seconds, then the
display will return to the current actual temperature of the internal cabinet.
• The current actual temperature will vary depending on the quantity of bottles stored and
how often the door is opened.
• To view the set temperature, press
approximately 5 seconds
• To select temperature display between Celsius (°C) and Fahrenheit (°F) by pressing
INTERIOR LIGHTS
Press to turn the interior lights on or off.
The interior light will automatically turn off after approximately 10 minutes if you leave the
light on.
TIPS FOR STORING WINE
This cooler is not only for storing wine bottles: you can also use it to keep other beverages
Store wine in sealed bottles.
Do not overload the appliance. The maximum number of bottles that can be stored is 18,
depending on the size of bottles.
To achieve the maximum capacity of the appliance, the bottles should be laid out as shown.
28
to select the required temperature.
the temperature will be increased or decreased by 1°C.
,the set temperature will flash on the display for