Faults - WIKA IntelliTHERM TGT73.100 Manual De Instrucciones

Termómetro de dilatación de gas con señal de salida eléctrica para atmósferas potencialmente explosivas
Ocultar thumbs Ver también para IntelliTHERM TGT73.100:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7. Faults

7. Faults
DANGER!
Danger to life from explosion
Through working in flammable atmospheres, there is a risk of
explosion which can cause death.
Only rectify faults in non-flammable atmospheres!
CAUTION!
Physical injuries and damage to property and the
environment
If faults cannot be eliminated by means of the listed measures,
the instrument must be taken out of operation immediately.
Ensure that pressure or signal is no longer present and
protect against accidental commissioning.
Contact the manufacturer.
If a return is needed, please follow the instructions given
in chapter 9.2 "Return".
WARNING!
Physical injuries and damage to property and the
environment caused by hazardous media
Upon contact with hazardous media (e.g. oxygen, acetylene,
flammable or toxic substances), harmful media (e.g. corrosive,
toxic, carcinogenic, radioactive), and also with refrigeration
plants and compressors, there is a danger of physical injuries
and damage to property and the environment.
Should a failure occur, aggressive media with extremely high
temperature and under high pressure or vacuum may be
present at the instrument.
For these media, in addition to all standard regulations,
the appropriate existing codes or regulations must also
be followed.
Wear the requisite protective equipment.
For contact details see chapter 1 "General information" or the
back page of the operating instructions.
WIKA operating instructions model TGT73 (Ex)
EN
25

Publicidad

Tabla de contenido
loading

Tabla de contenido