Pioneer PRS-D3000SPL Manual Del Usuario página 11

Two Amplifier Bridged
• Speaker wire size must be 12 AWG minimum.
• Load may be any combination of speakers but impedance must be 4 Ω or larger.
MODE SELECT switch
must be in MASTER position.
MODE SELECT switch
must be in SYNC INV
position. Before setting
to the position, remove
the screw and the stop-
per.
Two Amplifier
• Speaker wire size must be 12 AWG minimum.
• Load may be any combination of speakers but impedance must be 2 Ω or larger.
MODE SELECT switch
must be in MASTER position.
MODE SELECT
switch must be in
SYNC position.
Connect to a car stereo.
For details, see the "Connection Diagram" section.
Connecting wire with
RCA pin plugs (sold
separately).
Connecting speaker wire
(sold separately).
Connect to a car stereo.
For details, see the "Connection Diagram" section.
Connecting wire with
RCA pin plugs (sold
separately).
4 Ω
minimum
2,000 W
2 Ω
minimum
1,000 W
2 Ω
minimum
1,000 W
10