Connecting The Speaker Terminals - Pioneer PRS-D3000SPL Manual Del Usuario

4. Put the wire ties in the slits and
wrap the wire ties around the wires.
• Wrap the wire tie around the wire insulation,
not the stripped wire.
Wire tie

Connecting the Speaker Terminals

1. Expose the end of the speaker wires
using nippers or a cutter by about
10 mm and twist.
2. Attach lugs to speaker wire ends.
Lugs not supplied.
• Use pliers, etc., to crimp lugs to wires.
Slit
Twist
10 mm
Lug
Speaker wire
3. Connect the speaker wires to the
speaker terminals.
• Fix the speaker wires securely with the termi-
nal screws.
Terminal screw
Speaker
terminal
Speaker wire
8