Return Shipment; Transit Precautions; Removal From Storage - Brooks Instrument GT1306 Manual De Instalación Y Funcionamiento

Section 2 Installation
Models GT1306 and GT1307

2-3 Return Shipment

2-4 Transit Precautions

2-5 Removal from Storage

2-6 Installation
2-2
Prior to returning any instrument to the factory, contact your nearest
Brooks location for a Return Materials Authorization Number (RMA#). This
can be obtained from one of the following locations:
Brooks Instrument
407 W. Vine Street
P.O. Box 903
Hatfield, PA 19440 USA
Toll Free (888) 554-FLOW (3569)
Tel (215) 362-3700
Fax (215) 362-3745
E-mail: BrooksAm@BrooksInstrument.com
www.BrooksInstrument.com
Brooks Instrument
Neonstraat 3
6718 WX Ede, Netherlands
P.O. Box 428
6710 BK Ede, Netherlands
Tel 31-318-549-300
Fax 31-318-549-309
E-mail: BrooksEu@BrooksInstrument.com
All flow instruments returned to Brooks requires completion of Form
RPR003-1, Brooks Instrument Decontamination Statement, along with a
Material Safety Data Sheet (MSDS) for the fluid(s) used in the instrument.
Failure to provide this information will delay processing by Brooks
personnel. Copies of these forms can be downloaded from the Brooks
website www.BrooksInstrument.com or are available from any Brooks
Instrument location listed above.
To safeguard against damage during transit, transport the instrument to
the installation site in the same container used for transportation from the
factory if circumstances permit.
Upon removal of the instrument from storage, a visual inspection should
be conducted to verify its "as-received" condition.
Installation and Operation Manual
X-VA-1306-1307-eng
Part Number: 541B079AAG
October, 2016
Brooks Instrument
1-4-4 Kitasuna Koto-Ku
Tokyo, 136-0073 Japan
Tel 011-81-3-5633-7100
Fax 011-81-3-5633-7101
Email: BrooksAs@BrooksInstrument.com