Return Shipment; Transit Precautions; Removal Form Storage - Brooks Instrument Full-View 1110 Manual De Instalación Y Funcionamiento

Section 2 Installation
®
Brooks 1110 and 1140 Series

2-4 Return Shipment

2-5 Transit Precautions

2-6 Removal from Storage
2-2
Prior to returning any instrument to the factory, contact your nearest
Brooks location for a Return Materials Authorization Number (RMA#). This
can be obtained from one of the following locations:
Brooks Instrument
407 W. Vine Street
P.O. Box 903
Hatfield, PA 19440 USA
Toll Free (888) 554 FLOW (3569)
Tel (215) 362 3700
Fax (215) 362 3745
E-mail: BrooksAm@BrooksInstrument.com
www.BrooksInstrument.com
Brooks Instrument
Neonstraat 3
6718 WX Ede, Netherlands
P.O. Box 428
6710 BK Ede, Netherlands
Tel +31 (0) 318 549 300
Fax +31 (0) 318 549 309
E-mail: BrooksEu@BrooksInstrument.com
All flow instruments returned to Brooks requires completion of Form
RPR003-1, Brooks Instrument Decontamination Statement, along with a
Material Safety Data Sheet (MSDS) for the fluid(s) used in the instrument.
Failure to provide this information will delay processing by Brooks
personnel. Copies of these forms can be downloaded from the Brooks
website www.BrooksInstrument.com or are available from any Brooks
Instrument location listed above.
To safeguard against damage during transit, transport the instrument to
the installation site in the same container used for transportation from the
factory if circumstances permit.
Upon removal of the instrument from storage, a visual inspection should
be conducted to verify its "as-received" condition.
Installation and Operation Manual
X-VA-1110-1140-eng
Part Number: 541B040AAG
September, 2012
Brooks Instrument
1-4-4 Kitasuna Koto-Ku
Tokyo, 136-0073 Japan
Tel +81 (0) 3 5633 7100
Fax +81 (0) 3 5633 7101
Email: BrooksAs@BrooksInstrument.com