Tilt Lock Mechanism; Tilt Support Lever; Top Cowling Lock Levers - Yamaha 75A Manual Del Propietário

GB
EMD44110
TILT LOCK MECHANISM (for Manual
tilt model)
The tilt-lock mechanism is used to pre-
vent reverse thrust from the propeller lift-
ing the outboard motor when reversing.
q
To lock it, set the tilt-lock lever in the Lock
position. To release it, place the tilt-lock
lever in the Tilt position.
402041*
1 Tilt-lock lever
EMD60010

TILT SUPPORT LEVER

To keep the outboard motor in the tilted-
up position, lock the tilt support lever to
the clamp bracket.
403011*
EMD63110

TOP COWLING LOCK LEVERS

To remove the engine top cowling, pull
up the front lock lever and push the rear
lock lever(s) down. Then lift off the cowl-
ing. When replacing the cowling, check to
be sure it fits properly in the rubber seal.
Then lock the cowling again by returning
the levers to the locked position.
301042
301041
2-10