What Water To Use - Rowenta DW2000 Instrucciones De Uso

1103907021 DW2000 US Cord Reel_110x220 10/09/10 13:01 Page12

What water to use?

Your appliance has been designed to function with untreated tap water. If your water is
very hard (check with your local water authority), it is possible to mix untreated tap
water with store-bought distilled or demineralised water in the following proportions:
- 50% tap water, - 50% distilled or demineralised water.
However, it is necessary to operate the Self-Clean function regularly in order to
eliminate hard water deposits from the steam chamber.
Use the self-clean function approximately every 2 weeks. If the water is very hard clean
the iron weekly
Types of water not to use?
Heat concentrates the elements contained in water during evaporation.The types of
water listed below contain organic waste or mineral elements that can cause spitting,
brown staining, or premature wear of the appliance: water from clothes dryers, scented
or softened water, water from refrigerators, batteries or air conditioners, pure distilled
or demineralised water or rain water should not be used in your Rowenta iron. lso do
not use boiled, filtered or bottled water.
utomatic 3-position cut-out*
If, although switched on, the appliance is not moved, it will automatically switch off
and the auto off light will blink after the following intervals:
- fter 30 sec., if the iron is left placed down on the soleplate or lying on its side.
- fter 8 mins., if the iron is left standing on its heel.
To switch the iron back on, move the iron gently.
12