Peavey PV i 8500 Manual De Operación página 30

Specifications
INPUT SENSITIVITY:
Mic In to full power at the power amp. Master Volume Nom.
Full Nominal
-40 dBu -22 dBu
Line In to full power at the power amp. Master Volume Nom.
Full Nominal
-10 dBu +8 dBu
CHANNEL EQ:
Shelving EQ
Low EQ 80 Hz
Mid-Morph
Low 250 Hz
High 4 kHz
High EQ 12 kHz
CLIP LED:
FREQUENCY RESPONSE:
All controls nominal (detent)
PHANTOM POWER:
+48 VOLTS
NOISE:
Amp 1 = Amplifier output, loaded at 4 Ohms, through AP
All controls full down.
Main
<-
Amp 1 <-
Master Volume nominal
Main <-88 dBu
Amp 1 <-
THD:
All controls nominal
<
<0.5% @ amp 1 @ 100 Watts into 4 Ohms
All controls nominal
<0.005% @ main line output, +4 dBu in line input Channel 1
<0.5% @ amp 1 @ 100 Watts into 4 Ohms
MASTER EQ:
125Hz ±12 dB
250Hz ±12 dB
500Hz ±12 dB
1kHz ±12 dB
2kHz ±12 dB
4kHz ±12 dB
8kHz ±12 dB
12kHz ±12 dB
PVi8500.indd 30
±15 dB
±15 dB
±15 dB
±15 dB
METER ARRAY:
LIMIT
AMP LIMITER:
Limits amplifier power just before clipping. The limiter holds the amp power
without clipping and can be driven up to 18 dB past maximum output.
AMPLIFIER OUTPUT POWER:
120VAC
Both channels loaded at 8 ohms:
Both channels loaded at 4 ohms:
POWER REQUIREMENTS:
SIZE:
WEIGHT: 22.2 lbs.
MP3 PLAYER:
File format
Format File Type
MPEG 1/2/2.5
MP3
Layer 3
WMA
WMA, ASF
PCM
WAV
BLUETOOTH ® PLAYER:
·Built-in internal ROM for program memory
buffering
·Enhanced Power Control
interface ·Max. +4dBm output power with 20 dB level control from
register control.
Take your music with you with the extended wireless range of up to
Features and specifications subject to change without notice.
30
60 Watts RMS per ch
120 Watts Peak per ch
100 Watts RMS per ch
200 Watts Peak per ch
Sample Rate
Bit Rate
32kbps-320kbps
All*
CBR/VBR
All* 32kbps-320kbps
All* N/A
2013-1-31 10:42:33