Component Set Automotive Electronics
6 Technical data
6.1 General specifications
Parameter
Operating voltage of components
Electrical connection
Short circuit
Dimensions
CE marking per
Subject to change
Note:
For a detailed description of the components, see the chapter "Brief description of components"
6.2 Fault switches
Note:
Most parts in this components set contain a fault switch by means of which operation of the
component can be interrupted with a fault. This enables realistic fault finding in circuits that are set
up.
Activating the fault switch
26
Value
12 V DC, 0.8 A via linear regulator
4 mm safety plug/detent 19 mm
The components are not resistant to short-circuits and
may only be operated via a power supply with limited
power.
35.5 mm x 37.3 mm x 49.2 mm
RoHS directive
The fault switch is operated via a small screwdriver,
which is inserted into the housing next to the safety
bushings.
© Festo Didactic 8106714