Bosch GBH 18V-36 C Professional Manual Original página 7

(4) Locking sleeve
(5) Combi switch for operating modes and clockwise/
anticlockwise rotation
(6) Vibration damping
(7) Lock-on button for on/off switch
(8) Handle (insulated gripping surface)
(9) On/off switch
A)
(10) Battery
(11) Cover for GCY 42 Bluetooth
(12) Worklight
(13) Auxiliary handle (insulated gripping surface)
A)
(14) Battery release button
(15) User interface
(16) Battery charge indicator (user interface)
(17) Rapid shut-off indicator (KickBack control) (user
interface)
(18) Working modes indicator (user interface)
(19) Button to select the working mode (user interface)
(20) Power tool status indicator (user interface)
(21) Smartphone indicator (user interface)
(22) Temperature indicator (user interface)
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless rotary hammer
Article number
Rated voltage
Rated power input
A)
Impact rate
Impact energy per stroke ac-
cording to EPTA-Procedure
05:2016
Rated speed
– Clockwise
– Anticlockwise
Tool holder
Spindle collar diameter
Max. drilling diameter:
– Concrete
– Masonry (with hollow core
bit)
Weight according to EPTA-
A)
Procedure 01:2014
Length
Height
Bosch Power Tools
Cordless rotary hammer
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
ure during operation
during storage
Compatible rechargeable
batteries
Recommended rechargeable
®
Low Energy Module
batteries for maximum per-
formance
Recommended chargers
Data transmission
Bluetooth
Signal interval
Max. signal range
A) Depends on battery in use
B) Limited performance at temperatures <0 °C
C) The mobile terminal devices must be compatible with Bluetooth
D) The signal range may vary greatly depending on external condi-
Noise/Vibration Information
GBH 18V-36 C
Noise emission values determined according
3 611 J15 0..
to EN 60745-2-6.
V= 18
Typically, the A-weighted noise level of the power tool is:
W 800
Sound pressure level 90 dB(A); sound power
-1
level 101 dB(A). Uncertainty K = 3 dB.
min 0–2900
Wear hearing protection!
J 7.0
Vibration total values a
determined according to EN 60745-2-6:
Hammer drilling into concrete: a
Chiselling: a
-1
min 0–500
The vibration level given in these instructions has been
-1
min 0–500
measured in accordance with a standardised measuring pro-
SDS max
cedure and may be used to compare power tools. It can also
mm 74 be used for a preliminary estimation of exposure to vibra-
tion.
The stated vibration level applies to the main applications of
mm 35
the power tool. However, if the power tool is used for differ-
mm 40–90
ent applications, with different application tools or poorly
maintained, the vibration level may differ. This can signific-
antly increase the exposure to vibration over the total work-
kg 5.5−6.6
ing period.
To estimate the exposure to vibration accurately, the times
mm 460
when the tool is switched off or when it is running but not ac-
mm 250
tually being used should also be taken into account. This can
B)
and
®
D)
Low Energy devices (version 4.2) and support the Generic Ac-
cess Profile (GAP).
tions, including the receiving device used. The Bluetooth® range
may be significantly weaker inside closed rooms and through
metallic barriers (e.g. walls, shelving units, cases, etc.).
(triax vector sum) and uncertainty K
h
= 12 m/s
h
2
= 9.5 m/s , K = 2.3 m/s
h
1 609 92A 4Z7 | (28.10.2020)
English | 7
GBH 18V-36 C
°C 0 to +35
°C –20 to +50
GBA 18V...
ProCORE18V...
ProCORE18V...
≥ 5.5 Ah
GAL 18...
GAX 18V...
GAL 36...
®
Bluetooth 4.2
C)
(Low Energy)
s 8
m 30
®
2 2
, K = 1.5 m/s ,
2
,