Publicidad
COMFORT - Tech
In case of problems please contact your local dealer. Consult our website for spare parts
EN
drawing.
Bei Problemen bitte den Händler kontaktieren. Auf der Homepage fi nden Sie die
DE
Explosionszeichnung
En cas de problème, contacter le revendeur.
FR
Consulter le site Internet pour une vue éclatée des pièces de rechange.
En caso de cualquier problema, ponerse en contacto con su distribuidor local.
ES
Consultar el sitio web para el despiece de los repuestos.
In caso di problemi contattare il rivenditore di zona.
IT
Consultare il sito web per l'esploso ricambi.
Raadpleeg uw lokale dealer in geval van problemen.
NL
Raadpleeg de website voor de detailtekening met onderdelen.
Vid problem, kontakta en lokal återförsäljare.
SV
Gå till webbplatsen för en sprängskiss över reservdelar.
Kontakt din lokale forhandler i tilfælde af problemer.
DA
Rådfør med webstedet for listen over reservedele.
Ved problemer ta kontakt med den lokale forhandleren.
NO
Se nettsidene for detaljert tegning av reservedelene.
Mikäli ilmenee ongelmia, ota yhteys alueen jälleenmyyjään.
FI
Varaosien irto-osakuvat löytyvät nettisivuilta.
Em caso de problemas contactar o revendedor de zona.
PT
Consultar o sítio web para a vista explosiva das peças sobresselentes.
Read the following instructions and warnings carefully; failure to observe these installation and usage
EN
instructions as well as the laws for driving in the relevant country may cause severe harm or damage for
which the manufacturer declines all responsibility.
The product has been designed and manufactured exclusively for the illumination of recreational
vehicles, is not suitable for the illumination of home environments.
For safety reasons, it is advisable to always disconnect the negative terminal from the batteries on the
vehicle and then work without power during installation.
It is suggested to connect the power cable to the fuse box or to the terminal board and not directly to
the battery.
Use the correct fuse for connection to the vehicle power supply according to EN 1648-1 and EN
1648-2.
Installing an oversized fuse can cause overheating which can result in a short circuit or malfunction of
the entire electrical equipment.
Choose the safest and shortest installation for the power cable. Reduce the length of the power cable
as necessary.
Use only cable clamps suitable for the diameter of the power cable for connection to the terminal
board.
If incorrect terminals are used, this could cause a voltage drop and increase the formation of heat on
the terminal.
It is strictly forbidden to go around with the LED lights on; connect the power supply in order to inhibit
current fl ow while the vehicle is running.
We do not recommend prolonged periods of viewing at close proximity of the LED strip.
The manufacturer will not be held responsible for claims for damages resulting from the following:
- Defective installation or connection of the product.
- Damage to the product caused by mechanical infl uences and overvoltage.
- Alterations on the device without the express authorization of the manufacturer.
12
Publicidad
