Transportation And Storage - Ryobi RLM13E33S Traducción De Las Instrucciones Originales

When the motor has cooled down, connect the
plug to the power supply, then turn the power
on. Press the start button and then the on/off
button to start the product. If the product will
still not start, bring it to an authorised service
centre for repair.
GENERAL MOWING TIPS
■ When cutting long grass, reduce walking
speed to allow for more effective cutting
and a proper discharge of the clippings.
■ Do not cut wet grass; it will stick to the
underside of the deck and prevent proper
collection or discharge of grass clippings.
■ New or thick grass may require a higher
cutting height.
■ If you wish to collect the grass cuttings for
disposal, remove the mulching plug and fit
the grass catcher making sure the top flap
is properly closed. Empty the grass catcher
regularly; otherwise, the discharge chute
will become blocked with grass cuttings.
■ If you are making a light cut and wish for
the grass cuttings to remain on the lawn,
fit the mulching plug and close the top flap
to cover the discharge opening. It is not
necessary to fit the grass catcher in this
case.
■ The mower is designed to operate and cut
most effectively when moving forwards.

TRANSPORTATION AND STORAGE

■ Stop the product and disconnect from the
power supply, make sure that all moving
parts have come to a complete stop, and
allow it to cool down before storing or
transporting.
■ Clean all foreign materials from the product.
Store it in a cool dry and well-ventilated
place that is inaccessible to children. Keep
away from corrosive agents such as garden
chemicals and de-icing salts. Do not store
outdoors.
■ For transportation, secure the product
against movement or falling to prevent
injury to persons or damage to the product.
4 | English
WARNING
Use extreme caution when lifting or tilting the
product for maintenance, cleaning, storage,
or transportation, the blade is sharp, keep
all body parts away from the blade while it
is exposed.
MAINTENANCE
WARNING
Use only original
replacement parts,
attachments. Failure
cause possible injury, contribute to poor
performance, and may void your warranty.
WARNING
Servicing requires
knowledge and should be performed only by
a qualifi ed service technician. For service,
bring the product to an authorised service
centre for repair. When servicing, use only
original replacement parts.
■ Stop the product and disconnect it from the
power supply. Make sure that all moving
parts have come to a complete stop before
any cleaning or maintenance task.
■ You may make adjustments and repairs
described here. For other repairs, contact
the authorised service agent.
■ Check the grass catcher frequently for
wear or deterioration.
■ After each use, clean the product with a
soft dry cloth. Any part that is damaged
should be properly repaired or replaced by
an authorised service centre.
■ Check all nuts, bolts and screws at frequent
intervals for proper tightness to ensure the
product is in safe working condition.
■ Be careful during adjustment of the product
to prevent entrapment of the fingers
between moving blades and fixed parts of
the product.
■ When servicing the blades be aware that,
even though the power source is switched
manufacturer's
accessories and
to do so can
extreme care and