Menu Navigation Overview; Service And Repair - Bühler technologies GAS 222.20 Denox Manual De Instrucciones

GAS 222.20 Denox

5.2.1 Menu navigation overview

Temperature and status display
Display ____
The probe temperature is indicated in 0.5°C increments. Press the Enter key to access the main menu.
Current temperature
The temperature can be displayed in Celsius or Fahrenheit.
Main menu
Display
Probe controller
*
* These menus
will only appear
if one of the
options is ins
talled.
Top Settings
Global settings
Exit
Exit main menu
6 Maintenance
Always observe the applicable safety- and operating regula-
tions when performing any type of maintenance. Please refer
to the original operator's manual on the included CD or online
at www.buehler-technologies.com for maintenance informa-
tion.

7 Service and Repair

Please refer to the original operator's manual on the included
CD or online at www.buehler-technologies.com for a detailed
description of the unit including information on
troubleshooting and repair.
BX460035 ◦ 04/2021
Prob Temperature
Target temperature
Alarm
Alarm hysteresis
Exit
Exit submenu
* Controller for
Temperature
heated adapter
Target temperature
(add on)
(optional)
display: AdOn
Alarm
Alarm hysteresis
Exit
Exit submenu
toP
E
Submenu
Setting range
tEMP
Selection menu
Probe temperature
ALAr
Selection menu
Setting range
E
tEMP
Selection menu
Adapter temperature
ALAr
Selection menu
Setting range
E
Selection menu
Adjust value
stores the value
wait 5s: do not save
Setting the probe temperature
____
within the range:
50 °C...280 °C / 122 °F... 536 °F
___
Setting the alarm hysteresis
within the range: ±5°C...±30°C
Setting the within the range:
____
50 °C...180 °C / 122 °F... 356 °F
___
Setting the alarm hysteresis
within the range: ±5°C...±30°C
Setting the display unit.
C
Available in Celsius or
; C - ; F
Fahrenheit
Bühler Technologies GmbH 11