Husqvarna FS 513 Manual De Instrucciones página 20

ASSEMBLY
4. Position Water Tank, and route Water Tank Hose as
shown in Diagram at right (FS 513). FS 520 / FS 524 do
not use clamp shown in diagram.
5. Align rear bar and recessed area at rear of water tank.
• Press down fi rmly on water tank so it snaps in position
onto rear bar.
• When properly installed, water tank should pivot freely
on rear bar.
6. Disconnect existing water hose from blade guard.
This is the water hose from water control valve mounted
on saw.
20