Beurer UB 30 Instrucciones Para El Uso página 13

• The electrical and magnetic fields emitted by this heated underblanket
may interfere with the function of a pacemaker. However, they are still
well below the limits: electrical field strength: max. 5000 V/m, magnetic
field strength: max. 80 A/m, magnetic flux density: max. 0.1 millitesla.
Please therefore consult your doctor and the manufacturer of your
pacemaker before using this heated underblanket.
• Do not pull, twist or make sharp bends in the cables.
• If the cable and control of the heat pad are not positioned properly,
there may be a risk of becoming entangled in, being strangled by, trip-
ping over, or stepping on the cable and control. The user must ensure
that excess lengths of cable, and cables in general, are safely routed.
• Please check this heated underblanket frequently for signs of wear
and tear or damage. If any such signs are evident, if the heated under-
blanket has been used incorrectly or if it no longer heats up, it must be
checked by the manufacturer before being switched on again.
• Under no circumstances should you open or repair the heated under-
blanket (including the accessories) yourself because faultless function-
ality can no longer be guaranteed thereafter. Failure to observe this will
invalidate the warranty.
• If the mains connection cable of this heated underblanket is damaged,
it must be disposed of. If it cannot be removed, the heated underblan-
ket must be disposed of.
• When this heated underblanket is switched on:
– Do not place any sharp objects on it
– Do not place any heat sources, such as hot water bottles, heat
pads or similar, on it
• The electronic components in the control warm up when the heated
underblanket is in use. For this reason, the control must never be cov-
ered or placed on the heated underblanket when it is in use.
• It is essential to observe the information relating to the following chap-
ters: Operation, Cleaning and maintenance, Storage.
• If you should have any questions about using our devices, please
contact our Customer Services department.
13