Speed Settings - Eldom swif BL200 Manual De Instrucciones

OPERATING INSTRUCTION
EN
HAND BleNDeR BL200
GENERAL DESCRIPTION
1. Speed controller
2. On/Off switch I
3. On/Off switch II - tuRBO
4. Body
5. Interlock
6. Crushing tip
7. whisk adapter
8. whisk
9. lid (1)
10. Cutter (1)
11. Container (1)
12. Container with scale + lid
13. Pusher
14. lid (2)
15. Container (2)
16. Cutter (2)
17. Disc
18. Replaceable disc – slices
19. Replaceable disc – chips
20. Replaceable disc – fries
21. Replaceable disc – grater
TECHNICAL DATA
- wattage: 1000 w
- supply voltage: 230V ~ 50Hz
- maximum time of continuous operation: 1 min
- period of interval before re-use 1 minute

SPEED SETTINGS

using the controller (1), adjust the speed of the appliance. By adjusting the regulator, it is possible to
obtain five different speeds. the appliance starts working after pressing and holding the switch (2).
the tuRBO button (3) is used to immediately obtain the maximum rotational speed corresponding
to the position "5" of the controller (1).
the crusher works as long as the on / off switch (2 or 3) is pressed.
USE
Before first use all components outside the body must be thoroughly washed and dried (see:
CLEANING AND MAINTENANCE).
- put the tip (6) on the body (4) and lock it - make sure the tip is properly seated,
- immerse the blade in the mixed (crushed) liquid completely,
- select the appropriate speed using the controller (1) and press the button (2 or 3),
- crush the ingredients in circular movements until the desired consistency is obtained.
- press the lock buttons (5) and detach the tip (6) from the body (4) after the work is finished.
When mixing (grinding) hot liquids, be careful not to overheat the tip (6).
The crusher cutter (6) is very sharp. It can be touched only when the appliance is disconnected
from the mains and stopped.
•
10 EN
1
2
3
4
5
6
12
13
14
15
16
7
9
8
10
11
21
20
19
18
17