Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual
risk factors. The operator should pay particular and
additional attention to these points in order to reduce
the risk of serious personal injury.
Injury to hearing – Wear suitable ear protection
and limit exposure.
Injury to sight – Wear protective eye shields or
goggles when using the product.
Injury caused by vibration – Limit exposure and
follow the instructions on risk reduction in this
manual.
Electric shock after contact with hidden wires –
Hold the product only by insulated surfaces.
Respiratory injury from dust created by operating
the product – Wear suitable protection depending
on type of dust.
Cordless drill driver
Article number
Voltage
Chuck
No load speed (drill mode)
Gear 1
Gear 2
Clutch (positions)
Maximum torque
Maximum drilling capacity in
wood
Maximum drilling capacity in
metal
Weight (According to EPTA
procedure 01/2003)
Weight - not incl. battery pack
Ambient operating temperature
for the tool and battery pack
Ambient storage temperature
for the tool and battery pack
Recommended ambient
charging temperature
Recommended battery type
Recommended charger
See page 3.
1. Keyless chuck
2. Torque adjustment ring
3. Gear selector
4. Direction of rotation selector
5. Trigger switch
6. Handle, insulated gripping surface
7. LED light
ABS 18
COMPACT
8. Battery pack
5701 800 X
9. Belt clip
18 V
1.5 - 13 mm
The drill driver can be used for drilling into various
materials, including wood, metal, and plastics using a
0-600 min
-1
drill bit having a shank diameter of less than 13 mm.
0-1900 min
-1
The product can be used to drive and remove screws
and bolts using an appropriate bit.
23 + drill mode
For damage caused by usage other than intended, the
60 Nm
user is responsible.
40 mm
13 mm
1.9 kg
1.2 kg
Know Your Product
Intended Use
Symbols
Read all safety warnings and all
instructions.
0 - 40°C
0 - 27°C
5 - 40°C
LI 18V/4Ah
BASIC
ALG 18/4
BASIC
19