Product Description And Specifications; Intended Use; Tool Specifications; Product Features - Würth EB 12-A Traducción Del Manual De Instrucciones De Servicio Original

OBJ_BUCH-1120-002.book Page 13 Wednesday, June 8, 2016 2:39 PM
 The battery can be damaged by pointed
objects such as nails or screwdrivers or by
force applied externally. An internal short circuit
can occur and the battery can burn, smoke, explode or
overheat.
 Use only original Würth accessories.

Product Description and Specifications

Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock, fire
and/or serious injury.

Intended Use

The power tool is intended for cutting sheet metals without loss
due to metal chips. It is suitable for curved and straight cuts.
For damage caused by usage other than intended, the user is
responsible.

Product Features

While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
The numbering of the product features refers to the illustration
of the power tool on the graphics page.
1 Battery unlocking button
2 Battery pack
3 Button for charge-control indicator
4 Battery charge-control indicator
5 On/Off switch
6 Chip deflector
7 Handle (insulated gripping surface)
8 Hex key
9 Fastening screw for upper cutter
10 Upper cutter
11 Bottom cutter
12 Adjustment screw, bottom cutter
13 Fastening screw for bottom cutter

Tool Specifications

Cordless Sheet Metal Shear
Art. No.
Rated voltage
Stroke rate at no load n
0
Max. steel sheet cutting
1)
capacity
Smallest curve radius
Weight according to
EPTA-Procedure 01:2014
Permitted ambient
temperature
– during charging
2)
– during operation and
during storage
Recommended batteries
Recommended chargers
2
1) to 400 N/mm with reference to steel sheet
2) Limited performance at temperatures <0 °C

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-8.
Typically the A-weighted sound pressure level of the product
is less than 70 dB(A). Uncertainty K < 1.5 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-8: a
2
K< 1.5 m/s .
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for differ-
ent applications, with different accessories or insertion tools or
is poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
EB 12-A
5700 109 X
V= 12
-1
min 3600
mm 1.3
mm 15
kg 1.4–1.6
°C 0...+45
°C –20...+50
AKKU-LI 12V/x,x Ah
AL 30-LI
2
= 3.5 m/s ,
h
13