Before You Begin; Parts Included; Installation Procedure; Telescopic Duct Cover Installation - Thermador Masterpiece DC30MTW Guia De Instalacion

Before you begin

On some models, optional duct covers and telescoping
extensions may be used to fill the space between the
hood and ceiling in wall mount installations.
Model
HMWB30WS
HMWB361WS
HMWB36WS
HMWB481WS

Installation Procedure

Telescopic duct cover installation

IMPORTANT: Secure the hood to the wall after installing
the duct cover mounting bracket, but before installing the
telescoping duct cover extension.
Securing the telescoping chimney extension bracket
Carefully remove the protective film from the duct
1.
cover and hood assembly prior to the start of the
installa-tion. Use one hand to maintain the duct cover
steady while the other hand removes the protective
film.
Ensure that the minimum height of 30" (762 mm) from
2.
the bottom of the hood to the cooking surface will be
maintained.
6
B e f o r e y o u b e g i n
Duct Cover
DC30MTW
DC36MTW
DC48MTW
I n s t a l l a t i o n P r o c e d u r e

Parts Included

Harware bag (1):
▯
5 x 45 mm installation screws (4)
▯
5.4 x 75 mm installation screws (4)
▯
4.2 x 8 mm installation screws (11)
▯
10 x 60 mm drywall anchors (4)
▯
8 x 40 mm anchors (4)
▯
Torx adapter 20
▯
Upper duct cover brackets (2)
▯
Mounting template (1)
▯
Locate two studs at the mounting brackets location.
3.
Model A
30" (762 mm) 11 3⁄4" (298 mm) 29 3⁄4" (756 mm)
36" (914 mm) 11 3⁄4" (298 mm) 35 3⁄4" (908 mm)
48" (1219 mm) 11 3⁄4" (298 mm) 48" (1219 mm)
Mark the range hood vertical centerline. Make sure the
4.
line run through the very top of the ceiling.
Locate the mounting template in an 90° angle against
5.
the recently made centerline.
B