Sauder Via 401448 Manual Del Usuario página 9

Step 5
Insert the HALF GROMMETS (63P) and HALF GROMMET CAPS (64P) into the notches in the top edges of the ENDS (A4 and BB).
å
Insert two METAL PINS (1R) into the holes in the top edges of the ENDS (A4 and BB).
å
STOP: If you purchased the 419717 Hutch, follow the instructions from the 419717 book to attach the TOP (CC) and Hutch.
å
If you are not attaching the 419717 Hutch, continue with the following steps.
å
Fasten the TOP (CC) to the ENDS (A4 and BB) and BACK (D). Tighten eight TWIST-LOCK® FASTENERS.
å
NOTE: Be sure the METAL PINS insert into the holes in the TOP.
å
www.sauder.com/services
64P
1R
63P
BB
This hole must be here.
CC
D
1R
401448
STOP
If you purchased the
419717 Hutch, follow the
instructions from the
419717 book to attach
the TOP and Hutch.
63P
64P
A4
Page 9