Table of contents
1
1.1
1.2
2
2.1
Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
2.2
2.3
2.4
Type plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
2.5
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
2.6
3
Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
4
Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
5
Mounting method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
5.1
5.2
5.3
5.4
5.5
6
Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
6.1
6.2
7
Shutdown. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
8
9
9.1
Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
9.2
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
9.3
9.4
9.5
Function check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
9.6
Logalux - 6721814241 (2020/03)
1
Explanation of symbols and safety instructions
1.1
Explanation of symbols
Warnings
In warnings, signal words at the beginning of a warning are used to
indicate the type and seriousness of the ensuing risk if measures for
minimizing danger are not taken.
The following signal words are defined and can be used in this document:
DANGER:
DANGER indicates that severe or life-threatening personal injury will
occur.
WARNING:
WARNING indicates that severe to life-threatening personal injury may
occur.
CAUTION:
CAUTION indicates that minor to medium personal injury may occur.
NOTICE:
NOTICE indicates that material damage may occur.
Important information
The info symbol indicates important information where there is no risk to
people or property.
Additional symbols
Symbol
Meaning
▶
a step in an action sequence
a reference to a related part in the document
•
a list entry
-
a list entry (second level)
Table 46
1.2
General safety instructions
H Installation, commissioning, maintenance
Installation, commissioning and maintenance may be
performed only by an approved contractor.
▶ Install and commission cylinders and their
accessories according to the relevant installation
instructions.
▶ To reduce oxygen permeation and therefore
corrosion to a minimum, do not use vapour-
permeable components! Never use open, vented
expansion vessels.
▶ Never close the pressure relief valve.
▶ Use only original spare parts.
Table of contents
39