ANGLE GRINDERS
DWE4010
Congratulations!
You have chosen a D
WALT tool. Years of
E
experience, thorough product development and
innovation make D
WALT one of the most reliable
E
partners for professional power tool users.
Technical Data
Voltage
U.K. & Ireland
Type
Power input
No-load/rated speed
Wheel diameter
Grinding Wheel thickness
Wheel Type
Spindle diameter
Weight
Noise values and vibration values (triax vector sum) according to
EN60745-2-3:
L
(emission sound pressure level)
PA
L
(sound power level)
WA
K
(uncertainty for the given sound level) dB(A)
WA
Vibration emission value a
surface grinding
h
a
=
h,AG
Uncertainty K =
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off
or when it is running but not actually
DWE4010
Fuses
V
230
AC
Europe
V
230/115
AC
U.K. & Ireland
1
W
730
Defi nitions: Safety Guidelines
-1
min
11000
The definitions below describe the level of severity
mm
115
for each signal word. Please read the manual and
pay attention to these symbols.
mm
6
27
M14
kg
1.8
dB(A)
86
dB(A)
97
3
m/s²
3.5
m/s²
1.5
EC-Declaration of Conformity
MACHINERY DIRECTIVE
ANGLE GRINDERS
DWE4010
D
WALT declares that these products described
E
under Technical Data are in compliance with:
2015/35/EU, EN 60745-1, EN 60745-2-3.
doing the job. This may significantly
reduce the exposure level over the total
working period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
230 V tools
10 Amperes, mains
230 V tools
13 Amperes, in plugs
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
EN G LI SH
23