Examples Of Use/Sample Protocols - Chattannoga OptiFlex SHOULDER CPM Modo De Empleo

5.4 Examples of use/
sample protocols
5.4.1 Isolated
adduction/abduction
1. Complete the mechanical settings
and adjust the carriage to the patient
as described in section 4.2.
2. Press the MENU key on the pro-
gramming unit to access level 1 (M1).
3. Press the parameter key for internal
rotation or external
rotation and press the +/-
keys to set the carriage to the
desired rotation position to be
maintained during the isolated
abduction/adduction movements.
4. Next set the desired range of motion
for adduction and abduction by first
pressing the parameter key for
adduction and set the values
with the +/- keys.
5. Set the abduction value in the same
way .
Note!
- For an exclusive adduction/abduc-
tion protocol, motor B for the
rotation movement must be turned
off as described in steps 6 to 8
below.
- Having programmed the ranges of
motion, you can program additional
options, such as pause or speed.
6. Press the MENU key on the pro-
gramming unit to access level 3 (M3).
7. Press the Motor B ON/OFF parame-
ter key to activate the parame-
ter.
8. Deactivate motor B by pressing the
parameter key Motor B ON/OFF
again or the "–" (minus) key. The
check mark in the circle next to the
symbol must have disappeared.
9. Save the settings with the STOP key,
set the carriage to the starting
position with the START key and
initiate therapy by pressing the
START key again.
5.4.2 Isolated internal ro ta -
tion/ external rotation
1. Complete the mechanical settings
and adjust the carriage to the patient
as described in section 4.2.
2. Press the MENU key on the pro-
gramming unit to access level 1 (M1).
3. Press the parameter key for adduc-
tion or abduction
press the +/- keys to set the carriage
to the desired position to be main-
tained during the isolated rotation
movements.
4. Next set the desired range of motion
for internal/external rotation by first
pressing the parameter key for
internal rotation
values with the +/-keys.
5. Set the external rotation value in the
same way
Note!
- For an exclusive rotation protocol,
motor A for adduction/ abduction
must be turned off as described in
steps 6 to 8 below.
- Having programmed the ranges of
motion, you can program additional
options, such as pause or speed.
6. Press the MENU key on the pro-
gramming unit to access level 3 (M3).
7. Press the Motor A ON/OFF
parameter key to activate the param-
eter.
8. Deactivate motor A by pressing the
parameter key Motor A ON/OFF
again or the "–" (minus) key. The
check mark in the circle next to the
symbol must have disappeared.
9. Save the settings with the STOP key,
set the carriage to the starting
position with the START key and
initiate therapy by pressing the
START key again.
25
and
and set the
.