Pilotlight Led; Flash Power Steps; Auto Return - Elinchrom Ranger Quadra RX AS Manual De Instrucciones

Pilotlight LED -ON- Time
Press 7x Scroll to change value
Press more than 3 s
Special Functions
Flash power steps per push
Press 8x Scroll to change value
Auto Return from Menu to normal display mode
Press 8x Press 1x
Note about hidden menus
i
Some Quadra menus are dedicated for servicing or manufacturer needs, they do not add
any user function.
If the display shows the information below:
« U x » where x is « 0..3 » or « Ud » or « t00 »,
press immediately the ON / OFF (1) key to leave this menu, otherwise your device
would not work correctly if parameters are changed.
Scroll to
change value
Set the Pilotlight LED Timer between 1..60
seconds
To deactivate the Timer for continuous Pilot-
light, press this touch more than 3 s.
Note: Continuous Pilotlight will consume
Battery energy. The number of flashes will be
reduced
1/10 flash power steps per push
Standard setting
2/10 flash power steps per push
3/10 flash power steps per push
4/10 flash power steps per push
5/10 flash power steps per push
1/1 flash power steps per push
After approximately 2 seconds the unit
returns from the "Setup Menu" to normal
display mode. All configurations are stored
automatically.
After approximately 5 seconds the unit
returns from the "Setup Menu" to normal
display mode. All configurations are stored
automatically.
EN
15