TOPITEC EXPERT Instrucciones De Uso página 106

10. TROUBLESHOOTING
10.1 Practical tips – instant remedy!
Tool shaft fails to engage:
Check the position of the mixing container or jar in the clamping ring and reposition the container
or jar in the ring.
Error/fault
Mixing system
cannot be switched on.
Table 4 Troubleshooting
106
TOPITEC ® EXPERT User Manual | 11-2018
Danger
Before carrying out any maintenance or repair work, shut down the device,
following the proper shut-down procedure (see chapter 4.5). If the remedies
suggested here are not successful, please contact your dealer.
Cause
Main switch in position "0".
Fuse blown.
Power cable defective.
Remedy
Switch on the main switch.
Replace defective fuse with
a new one (10 A medium-
acting).
Replace power cable.