Transport And Packaging - TOPITEC EXPERT Instrucciones De Uso

5.3 Installation

5.3.1 Transport and packaging

All mixing systems are carefully inspected before they
are packed. However, the equipment might become damaged during transport.
5.3.1.1 Delivery (also for spare and replacement parts)
Incoming inspection
• Upon receipt of the delivery, check the goods for completeness, referring to the delivery docket!
In the event of damage:
• Check the transport packaging for visible damage!
• Check the goods for visible damage.
TOPITEC EXPERT packaging
®
1. Place the cardboard box on the floor, observing the "this side up" mark.
2. Cut the top of the packaging and fold down the four cover flaps.
3. Remove all packaging as far as this is possible at this stage.
4. Lift the device from the floor to its location of installation. If necessary, work in team of 2:
weight of box with device: approx. 19 kg.
5. Remove all remaining packaging.
Complaints procedure
If the goods have been damaged during transport:
• Immediately contact your dealer!
• Keep the packaging (for further inspection
by the shipping company or for return of the goods).
Packaging for return:
Use the original packaging.
If the original packaging is not available:
• Contact our customer service and request a packaging kit.
• If you have any queries regarding the packaging and securing of the goods for transport,
contact your dealer.
86
TOPITEC ® EXPERT User Manual | 11-2018