Installation And Assembly - TOPITEC EXPERT Instrucciones De Uso

5.3.1.2 Temporary storage
The transport packaging of the mixing system and spare parts is designed for storage for
maximum 3 months.
Note
Store the TOPITEC
Storage conditions:
• See chapter 2.3.5 "Technical data".
Warning
Never clean the TOPITEC
Water and dirt might otherwise enter the mixing system, causing damage.
5.4 Transport
5.4.1 Technical transport instructions
Warning
When transporting the device, observe the weight and centre of gravity of
the TOPITEC
might topple over. To prevent this, always observe its centre of gravity. If
necessary, secure the packaging of the TOPITEC
securing tackle.
When transporting the mixing system, take into account that certain
device components might topple over and ensure that there is sufficient
space available to avoid damage from physical impact (height of
components).
Assembly /
transport unit
TOPITEC ® EXPERT
(heaviest transport unit)
Table 2 Weights of transport units

5.5 Installation and assembly

Warning
Install the device on a firm and stable, non-slipping surface. The base of the
device must be fully supported and positioned at least 20 cm away from the
front and rear edges of the worktop, and 50 cm from the right and left edges
of the worktop. Above the device, there must be a clearance of minimum
100 cm to ensure proper ventilation and fire safety. Do not position the device
in a highly frequented area or corridor. The device owner must ensure that the
workplace of the device meets the general health & safety standards.
EXPERT in a dry room.
®
® EXPERT with a steam cleaner or a water jet.
EXPERT (see table 2). During transport, the TOPITEC
®
Centre of
Weight
gravity
approx.
19 kg Top-heavy
(net)
EXPERT
®
EXPERT with suitable
®
Lifting
Lashing points
gear
by hand
./.
(1 person)
87