Turning The Night Mode On/Off; Setting The Lip Synchronization; Video Setup Menu; Tv Type - Yamaha DVD-S661 Manual De Instrucciones

Ocultar thumbs Ver también para DVD-S661:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Setup Menu
Notes
• If you are not using the HDMI audio output, set
this to [OFF].
• If the monitor/receiver connected to this unit
using HDMI does not support HDMI audio signal
input, set this to [OFF].
• This unit can output the following audio signals
using HDMI: 32/44.1/48 kHz, 2ch linear PCM
signals and bitstream signals (Dolby Digital, DTS
and MPEG).
• When audio signals are being output by HDMI-
compatible components, digital output signals are
muted.
• When [DIGITAL OUTPUT] is set to [OFF] on
this unit, HDMI audio is muted even if [HDMI
AUDIO] is set to [ON] and an HDMI connection
is established between the monitor and receiver.
• When [DIGITAL OUTPUT] is set to [ALL] on
this unit, PCM signals are still output if the
monitor and receiver only support the PCM
format. However, the audio output is muted when
audio format plays back the DTS source.

Turning the night mode on/off

In the night mode, high volume output is
softened and low volume output is brought
upward to an audible level. It is useful when
you want to watch your favorite action movie
without disturbing others at night.
1
In "AUDIO SETUP PAGE", press 5/a
to highlight [NIGHT MODE], and then
press 3.
ON
Select this to level out the volume. This
feature is only available for movies with the
Dolby Digital mode.
OFF
Select this when you want to enjoy the full
dynamic range of surround sound.
2
Press 5/a to select a setting, and then
press ENTER.
26
En

Setting the lip synchronization

This feature allows you to delay the sound
output in order to synchronize it with the
video image. This may be necessary when you
use certain LCD monitors or projectors.
1
In "AUDIO SETUP PAGE", press 2 / 3
to highlight [LIP SYNC], and then
press 3.
2
Press 2 / 3 to adjust the delay time
(between 00 ms and 200 ms), and then
press ENTER.

Video setup menu

1
Press SET UP.
2
Press 2 / 3 to select "VIDEO SETUP
PAGE".
3
Press ENTER.
VIDEO SETUP PAGE

TV TYPE

TV DISPLAY
PROGRESSIVE
PICTURE SETTING
HDMI SETUP
TV type
This menu contains the options for selecting
the color system that matches your TV. For
details, see "Setting a color system for your
TV" on page 13.

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido