OFF
Select this to disable CD-upsampling.
88.2kHz (X2)
Select this to convert the sampling rate of
CDs to twice that of the original.
176.4kHz (X4)
Select this to convert the sampling rate of
CDs to four times that of the original.
2 Press 3 / 4 to select a setting, and then
press ENTER/OK to confirm your
selection.
Note:
– This setting is only valid for the signals
output at the analog jacks.
Night mode
In the night mode, high volume output is
softened and low volume output is brought
upward to an audible level. It is useful when
you watch your favorite action movie
without disturbing others at night.
1 In "AUDIO SETUP PAGE", press 3 / 4
to highlight [NIGHT MODE], and then
press 2.
ON
Select this to level out the volume. This
feature is only available for movies with the
Dolby Digital mode.
OFF
Select this when you want to enjoy the full
dynamic range of surround sound.
2 Press 3 / 4 to select a setting, and then
press ENTER/OK to confirm your
selection.
TIPS:
To return to the previous menu, press 1.
To exit from the menu, press SETUP.
Lip synchronization
This feature allows you to delay the sound
output in order to synchronize it with the
video image. This may be necessary when
you use certain LCD monitors or
projectors.
1 In "AUDIO SETUP PAGE", press 1 / 2
to highlight [LIP SYNC], and then
press 2.
2 Press 1 / 2 to adjust the delay time
(between 00 ms and 200 ms), and then
press ENTER/OK to confirm your
selection.
Video setup menu
1 Press SETUP.
2 Press 1 / 2 to select the "Video Setup"
icon.
3 Press ENTER/OK to confirm your
selection.
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
PROGRESSIVE
PICTURE SETTING
COMPONENT
Setup Menu
25
En