Communication Setup - NEOiD PTZ NDI 20X Manual Del Operador

COMMUNICATION SETUP

Move the main menu cursor to [COMMUNICATION SETUP], and press
[HOME] key enter the communication setup page, as shown in the following
figure.
Protocol: Control protocol type, optional items: Auto, VISCA, PELCO-D, PELCO-P.
V_Address: Optional items: 1 ~ 7.
(Effective only in Auto, VISCA protocol).
V_AddrFix: Optional items: On, Off (When set to On, useless in 88 30 01 FF
Command).
P_D_Address: Optional items: 0 ~ 254. (Effective only in PELCO-D protocol).
P_P_Address: Optional items: 0 ~ 31. (Effective only in PELCO-P protocol).
Net Mode: Set the serial port network control, optional items: Serial, Paral.
Baudrate: Serial port baud rate, optional items: 2400, 4800, 9600, 38400.