NEOiD PTZ NDI 20X Manual Del Operador página 122

NETWORK SETTINGS
Port Settings
1.HTTP Port
IP address identifies the network device, the device can run multiple web
applications, each network program using network port to transmit data,
so data transmission to be carried out between the port and port. Port
setting is to set up web server program using which port to transmit. When
port mapping, need to be consistent with the port number (default port:
80).
2.RTSP Port
The video conference camera support RTSP protocol, use the VLC tools
broadcast, default port: 554.
3.PTZ Port
Support PTZ protocol, default port: 5678.
Control Protocol Settings
Setting the camera control communication protocol, include Visca address,
Pelco-D address and Pelco-P address.
RTMP Settings
Setting the MRL of RTMP, select enable or disable video and audio. You can
select control code stream of "On", "Off", "Video", "Audio" between in the
two streams.
RTSP Settings
Turn On/Off RTSP auth.
ONVIF Settings
Turn On/Off ONVIF and ONVIF auth.
Multicast Settings
Turn On/Off multicast. Setting the multicast address (default value is
224.1.2.3) and port (default value is 6688, then 6688 is the multicast port
of the first stream; 6690 is the multicast port of the second stream).
SDK Settings
Turn On/Off active connection. Setting SDK address (default value is
192.168.100.138) and port (default value is 1234).