NEOiD PTZ NDI 20X Manual Del Operador página 89

2)Connect the power adapter to the power connector on the rear
panel of the camera. The power indicator on the front panel of the
camera is on.
3)After the camera is powered on, it starts to initialize, right up to the
limit position, and then both horizontal and vertical go to the middle
position, the motor stops running, and the initialization is completed.
(Note: If preset 0 is saved, PTZ will be move to preset 0)
ABOUT PRODUCT
FEATURES
H.265 Encode
It supports H.265 encode, enabling transmit full HD 1080p video stream by
ultra-low bandwidth.
1080P Full HD
Apply Panasonic's high quality HD CMOS sensors of 1/2.7 inch, 2.07 million
effective pixels, so as to reach maximum 1920 x 1080 resolution and
achieve quality image.
Ultra-high Frame Rate
The output frame rate up to 60fps in 1080P.
Multiple Interfaces
It supports HDMI, 3G-SDI interface, effective transmission distance up to
150 meters (under 1080P30). HDMI, SDI, Network can output at the same
time. It also support CVBS interface.
20x Optical + 16x Digital Zoom
High quality super telephoto lens, it supports 20x optical zoom, and 16x
digital zoom.
AAC Audio Encoding
Support AAC audio encoding, better sound quality and smaller bandwidth.
Local Storage
Support U disk local storage, local recording directly without NVR.
.