Network Function - NEOiD PTZ NDI 20X Manual Del Operador

RESTORE DEFAULT
Move the main menu cursor to [RESTORE DEFAULT], and press [HOME]
key enter the restore default page, as shown in the following figure.
Restore: Confirm restore factory settings, optional items: Yes, No.
Note: Press [HOME] button to confirm, all parameter restore default,
include IR Remote address and VISCA address.

NETWORK FUNCTION

OPERATING ENVIRONMENT
Operating System: Windows 2000/2003/XP/vista/7/8/10
Network Protocol: TCP/IP
Client PC: P4/128M RAM/40G HDD/ support scaled graphics card, support
DirectX 8.0 or more advanced version.
EQUIPMENT INSTALLATION
1. Connect video conference camera to your internet or to your PC via
network cable.
2. Turn on DC 12V power.
3. If the network connection is normal, the connection light (green) at the
network interface will light up within 5 seconds, and the data indicator
(orange) will flash, indicating that the physical connection of the camera
has been completed.