Symbols On The Machine; Safety Instructions; Start Up - Kärcher NT 75/1 Tact Me Te H Manual Original

Symbols on the machine

Flat fold filter
Order No.
Safety filter bag
Order No.

Safety instructions

Danger
When the outgoing air is carried back
–
into the room, a sufficient ventilation
rate L in the room must be ensured. To
comply with the required limit values the
carried back volume flow must be 50%
of the fresh air volume flow (room vol-
ume V x ventilation rate L
R
mum. Without a specific ventilation
system the following applies: L
Only persons trained in the use of the
–
machine and the handling of substanc-
es for which the machine is to be used
including training in the safe disposal of
the sucked-in material may use the ma-
chine.
This appliance contains harmful dust.
–
Evacuation and maintenance work, in-
cluding the disposal of the dust collec-
tion containers, may only be performed
by specialists who wear the appropriate
protective equipment.
Do not use the appliance without the
–
complete filtering system.
Please follow the safety regulations ap-
–
plicable to the materials that are to be
treated.
20
6.904-364.0
6.904-420.0
The appliance allows 2 operating modes:
1 Industry vacuum cleaner mode (socket
2 Dedusting mode (socket used)
 Connect the suction hose and insert the
) at maxi-
W
=1h .
–1
W
Do not vacuum without the filter elements;
otherwise, the suction motor can get dam-
aged and this can be hazardous to health
on account of increased release of fine dust
particles.
The horn blows when the air speed falls be-
low 20 m/s.
Note: The horn reacts to negative pres-
sure.
 Set the rotary switch to the correct suc-
Static charge is deflected by providing
earthing to the connection nozzles. This
prevents the formation of sparks and cur-
rent shocks due to attachments (option)
with electrical conductivity.
EN
– 3

Start up

 If necessary, peel the adhesive label in
the relevant national language off the
accompanying adhesive label sheet
and paste it over the German text on
the appliance.
not used)
suction nozzle or connect to the dust-
generating device depending on the op-
erating mode.
Warning
Horn
tion hose cross-section.
Anti-static system