Using your 2-in-1 bib: Facing-out position
All manuals and user guides at all-guides.com
6.
To adjust how high the baby rides on your chest,
lift the baby slightly and pull the "shoulder strap
end" forward, first on one strap, then on the
other. When the baby is properly positioned,
you should be able to tilt your head forward
and kiss the top of your baby's head.
* The baby should NEVER be leaning forward in the
carrier.
* PLEASE NOTE: The arms of smaller babies should be
positioned below the "head support buckles."
Larger babies' arms should be above the buckles,
and rest comfortably over the folded
down head support.
1.
(Either side of the bib can be facing out.)
Attach the "2-in-1 bib" by squeezing the two
"hook & loop circles" on either side of the bib
against the two "bib attachment strips" located
inside the carrier body on either side, near the
baby's chest.
2.
The bib should be folded over the already
folded down head support.
10.