Power Circuit - Overview - Danfoss VLT Micro Drive FC 51 Guía Rápida

®
Quick Guide
VLT Micro Drive FC 51
1 1

1.3.5 Power Circuit - Overview

1)
Illustration 1.6 Diagram Showing all Electrical Terminals
1) Brakes (BR+ and BR-) are not applicable for enclosure size M1.
®
For information about brake resistors, see VLT Brake Resistor MCE 101 Design Guide.
Improved power factor and EMC performance can be achieved by installing optional Danfoss line filters.
®
Danfoss power filters can also be used for load sharing. For more information about load sharing, see VLT FC 51 Micro Drive
Load Sharing application note.
14 Danfoss A/S © 10/2017 All rights reserved. MG02BC4P