Publicidad
Idiomas disponibles
Idiomas disponibles
kayak FRAMURA
User's Manual
• A recreational vessel designed for use on internal waterways with an expected wind strength reaching Grade 4 on
the Beaufort Scale inclusive and a determining wave height of up to 0.3 metres inclusive, with occasional waves
up to 0.5 metres of height caused e.g. by vessels passing by.
• The boat has been manufactured in compliance with the EN ISO 6185-1 Standard, Category IIIB.
• Related standards: EN ISO 10087, EN ISO 10240, EN ISO 14945.
Dear Customer,
This manual will help you to easily and safely master your vessel.
It contains a detailed description of the vessel, the supplied or built-in
equipment, its sets as well as information about its control and mainte-
nance. Please read it carefully, thereby getting to know the boat before
actually using it.
If this is your fi rst vessel or you have changed the type of vessel and
do not know this type well, please get acquainted with its maintenance
and control prior to your fi rst individual use of the vessel so that it is safe
and comfortable.
Your dealer or the National Yacht Federation or club will recommend
you appropriate training courses or qualifi ed instructors.
Do not pull o until the expected sailing conditions (wind strength and
wave height) are appropriate for the construction category of your ve-
ssel and you and your crew are able to control it in these conditions.
Please store this manual in a safe place and hand it over to the new
owner should you sell the vessel.
1. Table of Specifi cations
(indicative values)
Length (cm)
Width (cm)
Diameter of sidewall cylinders (cm)
Number of air chambers
Dimensions of the folded product (cm)
Dimensions - packed in cardboard (cm)
Maximum operational pressure
Weight (kg)
Maximum load (kg)
Maximum number of kayakers
Draught (cm)
Highest anchor above surface (cm)
2. Technical Description - See Picture 1
1 Side tube
2 Bottom
3 PUSH/PUSH valve - enables infl ation/defl ation, pre-
ssure control, and pressure measurement by a pressure
gauge (placed below the top part of the boat)
4 Pressure-relief valve (placed below the top part of the
boat)
5 Infl atable seat with back-rest
6 Foot-rest (placed below the top of the boat)
7 Plastic handle
8 Manufacturer's label (on the tube)
9 Yellow "WARNING" label
10 Bungee netting
11 Black zip with slider
8
TABLE OF CONTENTS:
2. Technical Description
70 × 47,5 × 32
0,02 MPa [0,2 Bar / 3 PSI]
12 Anchor for foot-rest attachment (detail A)
13 Anchor for the rest on the tube (detail B)
14 Anchor for the seat on the bottom (Detail B)
15 Seat mounting strap (Detail B)
16 Reinforcement attachment (placed below the top part
of the boat)
17 Skeg-fi n attachment
18 Kayak metal reinforcement
19 Elastic rope for fi xing baggage
20 Drainage hole
21 Safety rope tie-down
22 Safety rope
23 Handle (on the tube)
24 Collar tunnel
25 Plastic reinforcement
26 Reinforcement coupling
VERSION 11/2021
GB
FRAMURA
410
75
27 × 16
3 + 1 + 1
68 × 40 × 30
16
180
1
15
40
page 8
8
9
9
9
10
10
10
10
10
10
11
Publicidad
Capítulos
