Infantino Flip Manual Del Propietário página 7

All manuals and user guides at all-guides.com
4.
Fasten the "lumbar support belt" around your
waist. Slide the belt around your waist until the
padded area is centered on your back. Pull the
strap to tighten and secure the belt, making sure
the padded support area remains centered. Any
excess strap may be rolled in toward the carrier
and secured with the "hook & loop" fastener.
5.
Once the carrier is properly fitted to your body,
completely open either side of the carrier. To
release the "head support buckle," press in on
the sides of the buckle and pull the two sections
apart.
6.
Open the leg hole area on the same side as the
open "head support buckle" by releasing the "side
closure buckle" located in the leg hole area and
pulling open the "hook & loop."
7.
Lift the baby facing you. While holding the child
securely, place him or her into carrier through
the opening, ensuring that the baby's leg goes
through the leg hole on the side which is still
fastened.
6.