Uline RUBBERMAID H-4606 Manual Del Usuario página 2

Figure 1
Figure 2
Figure 3
PAGE 2 OF 15
ASSEMBLY
1. Slide shelf supports into openings on each shelf.
(See Figure 1)
2. Place four long aluminum uprights onto pegs on base.
Use rubber mallet to secure in place. (See Figure 2)
3. Place first shelf onto long aluminum uprights.
(See Figure 2)
4. Place four long aluminum uprights onto pegs of first shelf.
Use rubber mallet to secure in place. (See Figure 3)
5. Place second shelf onto long aluminum uprights.
(See Figure 3)
6. Place four short aluminum uprights onto pegs of second
shelf. Use rubber mallet to secure in place. (See Figure 3)
1221 IH-4606