Sony PXW-FX9V Guía Rápida página 5

5
English
Major Functions Updated in
Version 2.1
3840×2160 RAW output support
Support for 3840×2160 has been added to
RAW Output Format for the RAW output
function that is enabled when an XDCA-FX9
(option) is attached to the camcorder.
This can be selected when Imager Scan Mode
is set to S35 4K and Codec is set to RAW. Also,
when RAW Output Format is set to 3840×2160,
Slow & Quick Motion can be enabled with the
frame rate set to 100P or 120P.
White Balance adjustment improvement
The White Balance adjustment in sunlight has
been made easier, and can also be adjusted
to a more natural color.
Major Functions Updated in
Version 2.0
Added recording format selection
options
ˎ An FFcrop 5K option has been added to Rec ˎ
Format >Imager Scan Mode in the Project
menu.
ˎ When Imager Scan Mode is set to FF 6K,
ˎ
FFcrop 5K, or S35 4K, Video Format can now
be set to 4096×2160.
ˎ A "24" option has been added to Rec ˎ
Format >Frequency in the Project menu.
[Note]
Video Format setting of 4096×2160 is supported only
when Imager Scan Mode is set to FF 6K, FFcrop 5K, or
S35 4K.
User 3D LUT support
A CUBE file (*.cube) for a 17-point or 33-point
3D LUT created using RAW Viewer or DaVinci
Resolve (by Blackmagic Design Pty. Ltd.) can
now be loaded.
RAW output support
RAW video signal can be output from the
RAW OUT connector of an XDCA-FX9 (option)
attached to the camcorder.
High Dynamic Range (HDR) support
Hybrid Log Gamma (HLG) is supported to
enable shooting with expanded dynamic
range.
The two following types of HLG are available.
— Natural: Characteristic conforming to ITU-R
BT.2100(HLG).
— Live: Characteristic conforming to ITU-R
BT.2100(HLG) that delivers improved HDR
performance.
When HDR is selected, the color space is
expanded to ITU-R BT.2020 equivalent.
Added frame rate options for Slow &
Quick Motion
150fps and 180fps options have been added
for the frame rate when Rec Format >Imager
Scan Mode in the Project menu is set to FF 2K.
Expansion of ISO/Gain configurable
range
The configurable range for ISO and Gain
when Base Setting >Shooting Mode in the
Project menu is set to SDR or HDR has been
expanded.
— When the gain setting mode is set to ISO,
values up to the maximum ISO 102400 can
be configured.
— When the gain setting mode is set to dB,
values up to 27dB can be configured.
AF function improvements
ˎ Focusing is now supported not just for ˎ
face detection but also using detection of
people's eyes.
ˎ When Focus Area is set to Flexible Spot ˎ
or Zone, the focus area frame can now be
moved using touch operation.
ˎ AF transition speed and AF subject
ˎ
shift sensitivity can now be assigned to
assignable buttons.
ˎ In Cine EI mode, face/eye detection AF ˎ
performance has been improved for when
Gamma is set to S-Log3.
Support for changing settings from the
status screen
Some settings can be modified from the
status screen. Items can be selected using the
multi-function dial, multi selector, or by touch
operation.
6G SDI output support
4K/QFHD resolution signals can now be output
from the SDI OUT connectors when the system
frequency is set to 29.97, 25, 24, or 23.98.
Audio function improvements
ˎ A wireless microphone can be used by ˎ
inserting a portable wireless tuner in the
wireless receiver insertion slot of an XDCA-
FX9 (option) attached to the camcorder. The
following two models of portable wireless
tuners are supported.
— URX-S03D UHF Synthesized Diversity
Tuner
— DWR-S02DN Digital Wireless Receiver
ˎ The digital interface of an XLR-K3M XLR ˎ
Adaptor Kit attached to the multi-interface
shoe of the camcorder is supported.
USB tethering support
A smartphone can now be connected via a
USB cable to an XDCA-FX9 (option) attached
to the camcorder, allowing the camcorder to
connect to the internet using the smartphone.
Iris T value support
The iris indicator now displays T values when a
lens that supports T value display is attached.
Password security enhancements
Passwords used for basic authentication now
must be 8 characters or longer and contain
at least one alphabetic character and one
numeric character, respectively, for enhanced
security.
Image quality improvements in S35 2K
imager scan mode
The image quality has been improved for
when Rec Format >Imager Scan Mode in the
Project menu is set to S35 2K.