Paging; Out Of Range Warning; Flash Button (R); Setting The Ring Volume And Melody - Topcom BUTLER 2950 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Topcom Butler 2950

5.8 PAGING

When you press the Paging button
helps you find a lost handset. Press any key to stop the ringing on a handset.

5.9 OUT OF RANGE WARNING

When the handset is out of the working range of the base unit during a conversation, the unit will emit a warning signal
to warn the user that he has to move closer towards the base unit.

5.10 FLASH BUTTON (R)

When you press the R button, also called flash or recall, the unit generates a line interruption (of 100 ms or 250 ms). It
gives you the possibility to use the special services of your telephone provider and/or to transfer calls when you have
a telephone exchange.
5.10.1 Setting the Flash time
Press and hold the redial button
The display will show:
'S' for 100ms
or 'L' for 250ms
The flash time setting will disappear after 2 sec. from the display

5.11 SETTING THE RING VOLUME AND MELODY

5.11.1 Handset melody
Press and hold the melody button
Select the desired melody (1-9) by means of the scroll keys
Press
again to confirm the setting
5.11.2 Handset ring volume
Press the volume button
The handset will ring in the current volume
Press 1-5 or use the scroll keys
Press '0' to turn the volume OFF
5.11.3 Setting the ring volume level of the base
You can change the ring volume and melody of the Butler 2950 base.
When base is ringing
Press volume key
Remark:
- You can turn the ringer volume of each individual handset ON or OFF by simply press and hold the
in standby.
- The base ring melody is not adjustable!

5.12 KEY LOCK

When the keypad is locked, pressing any key will have no effect during standby (except holding the
Press and hold the
appears on the display and the keypad is locked
Press and hold the
When there is an incoming call, you can still answer the call by pressing the Line button
functions as normal. When the call is ended, the keypad will be locked again

5.13 SETTING THE DIALLING MODE

There are two types of dialling mode:
DTMF/Tone dialling (the most common) (default)
Pulse dialling (for older installations)
8
All manuals and user guides at all-guides.com
on the base unit, the handset emits a ringing signal for 20 seconds. This signal
for 3 sec.
until the current melody is heard.
in standby
to select the desired volume
on base to increase or decrease ring volume
key
key again to un-lock the keypad
or by entering a number (1 - 9).
. During the call, the keypad
key
key).
Topcom Butler 2950

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido