Hybrid - AVer DL10 Manual Del Usuario

Hybrid

Under Tracking Settings, select Hybrid.
Hybrid benefits you with the advantages of both the Presenter Mode and Zone Mode. Under Hybrid
Mode, the camera tracks and captures the presenter's movement. As the presenter enters the
previously configured preset point zone, the camera steers to focus on the content shown on the
teaching gadget in the zone, such as the whiteboard and the projector screen.
Firstly, configure Preset 10-13 to
1. Select Preset 10 from the drop-down menu.
2. Use ,
Select Save to save Preset 10.
3.
4. Select Delete to remove Preset 10. You can proceed to reconfigure Preset 10.
5. Repeat the steps above to configure Preset 11-13. Leave some space between Preset 10 to 13,
as each preset point zone is meant to center on the content of the teaching gadget, such as the
whiteboard and the projector screen.
define the preset point zone.
, , ,
Zone
(Preset 11)
and to adjust the camera to the desired angle.
DL10 Tracking Camera
Zone
(Preset 10)
Presenter
25