Nokia N Serie Manual Del Usuario página 52

Flash
The flash is available only in the main camera.
Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover the
flash while taking a picture.
The camera has an LED flash for low light conditions. The
following flash modes are available for the still image camera:
Automatic ( ), R. eye redu.
To change the flash mode, in the active toolbar, select the
desired flash mode.
Setup settings—adjust color and lighting
To enable the camera to reproduce colors and lighting more
accurately, or to add effects to your pictures or videos, use
the scroll key to scroll through the active toolbar, and select
from the following options:
White balance—Select the current lighting condition
from the list. This allows the camera to reproduce colors
more accurately.
( ), On ( ), and Off (
The screen display changes to match any settings you make,
so that you see how the change affects the pictures or videos.
The available settings vary depending on the selected camera.
The setup settings are camera specific; if you change the
settings in the secondary camera, the settings in the main
camera do not change. The setup settings do, however, transfer
between the image and video modes. The setup settings
). return to the default settings when you close the camera.
If you select a new scene, the color and lighting settings are
replaced by the selected scene. See "Scenes," p. 51. You can
change the setup settings after selecting a scene if needed.
Scenes
A scene helps you to find the right color and lighting settings
for the current environment. The settings of each scene have
been set according to a certain style or environment.
Scenes are only available in the main camera.
In the active toolbar, select from the following options: