Operation; Before The First Use - Bartscher Panini 1RDIG Manual De Instrucciones Originales

5.2. Operation

5.2.1. Before the first use

NOTE
Incorrect use may cause damage.

Use the device only with the grease collection tray attached to it to prevent the
device damage or soiling.
The grease colletion tray (9), where the dripping fat and other liquids from the grill are
collected, is located at the front of the lower grill plate.
WARNING!
Risk of health hazards due to smoke!
Due to production residues slight smoke may be emitted.

The first time, start the grill without any products for grilling and ensure enough
ventilation at its location.
Before the first use, burn in and clean the grill plates (9, 11). It is necessary to burn in
the grill plates only before the first use to remove any production residues.
Burn-in:
1. Make sure that there are no packing materials or other objects on the grill plates
(9, 11).
2. Clean the grill plates (9, 11) (see section „6. Cleaning and maintenance").
3. Position the device according to the description.
4. Plug into a single grounded socket.
5. Insert the grease collection tray (8) by its high side under the grill plate (9).
6. Close the device with the operating handle (13).
7. Set the ON/OFF switch to its I position. The device ir ready for use, the green power
indicator light in the ON/OFF switch (1) is on.
CAUTION - HOT SURFACE
Risk of burns by hot surfaces!
The casing and grill plates become hot.

Do not touch any surfaces.
- 30 -