Transport, Packaging And Storage; Delivery Check; Packaging; Storage - Bartscher Panini 1RDIG Manual De Instrucciones Originales

3. Transport, packaging and storage

3.1. Delivery check

Check the delivery upon completeness and transport damage immediately after receipt.
In case of visible transport damage refuse to accept the receipt or conditionally accept
the receipt. Note the scope of damage on the transport documents/consignment list of
the shipping company and place a complain. Hidden damage must be reported
immediately upon its discovery as compensation claims may only be presented within
the applicable time-limits.

3.2. Packaging

The packaging and its elements are made of recyclable materials. Particularly, plastic
films and bags, cardboard boxes. Do not dispose of the device cardboard box. It may be
used to store the device when relocating or when sending the device to our service
point in case of any defaults. Before you start the device, completely discard any
external or internal packaging material. Check that the unit and all accessories are
present. If you find that something is missing, please contact our Customer Service
Department. When managing the packaging observe the applicable domestic law.
Introduce the recyclable packaging materials to recycling.

3.3. Storage

Leave the packaging closed until installation of the device, and follow the external
indications as to the location and storage. Store the packaging only in the following
conditions:

not outdoors,

in dry and dust free surroundings,

away from aggressive agents,

not exposed to direct sunlight,

protected against mechanical shocks.
In case of longer storage time (> 3 months) check the general state of all the elements
and packaging and refresh or renew, if necessary.
- 26 -