auna 10034900 Manual Del Usuario página 43

Save your settings by pressing the dial. The LCD display shows the message
Alarm Saved. The alarm clock is now activated.
• The alarm settings are only saved if you then confirm your settings
under the menu option Alarm On or Alarm Off by pressing the dial.
• As soon as Alarm 1 and/or Alarm 2 are active, an alarm symbol
shown on the left and / or right of the LCD display for each active
alarm.
Switching off the alarm: When the alarm goes off at the set time, press
any button. The alarm will stop and remain off for 24 hours or until the next
programmed alarm time.
Pausing the alarm (Snooze function): When the alarm goes off at the set
time, press the dial once or several times to pause the alarm (radio or alarm
buzzer) for 5, 10, 15 or 30 minutes. The LCD display now shows the message
Snooze and the remaining time until the alarm goes off again.
Stop snooze: If you want to stop the snooze function and the alarm
prematurely, press the
Time/date
• If an RDS signal (radio data system) is available, the date and time are
automatically set via the radio stations. If no RDS signal is available,
you can also set the date and time manually.
• In standby mode, the time and date are shown on the LCD display.
Automatic update
The Auto update function allows you to set whether the date and time are
set automatically via the radio stations' RDS (Radio Data System) signal or
manually.
12h/24h display
• If the 12h display is set, PM appears the after the time on the display 1
from 12 noon until 11:59 at night. From 12 midnight until 11:59 midday,
the time is followed by AM on the LCD display.
• The default setting for the time is 24h display.
Date format
Select between the date formats DD-MM-YYYY or MM-DD-YYYY.
Sound settings
The bass and treble functions in the system menu allow you to increase or
decrease the bass and treble reproduction in the range from +14 dB to -14
dB in steps of 2 dB.
button.
is
EN
43