Backlight - auna 10034900 Manual Del Usuario

EN
44

Backlight

Timeout: You can use the Timeout function to set the number of seconds
after which the display backlight is dimmed after the device is switched off
or after a button was pressed.
On level: The On level function allows you to adjust the brightness level of
the display backlight during operation.
Dim level: The Dim level function allows you to adjust the dimming level
of the display backlight after switching off the device or after pressing a
button.
Language
In the system menu, you can select between the languages English, French,
German, Czech, Danish, Dutch, Polish and Slovak.
Factory settings
If you reset the device to the factory defaults using the Factory reset
function, all stored settings such as stored radio stations, date, time and
alarm times will be deleted
Software version
• While in the System menu, press the TUNE+ or TUNE- button (several
times if necessary) or turn the dial until SW version appears on the LCD
display.
• Press the dial to display the software version of the device.