Adjusting The Volume; Viewing The Display; Plug And Play Feature - Samsung LN-R2355W Instrucciones Del Propietario

Adjusting the Volume

1. Press the VOL
Using MUTE button:
At any time, you can temporarily cut off the sound using the MUTE button.
1. Press MUTE and the sound cuts off. The word "Mute" will appear in the lower-left corner of the screen.
2. To turn mute off, press the MUTE button again, or simply press the VOL

Viewing the Display

Press the INFO button on the remote control to view current channel and the status of certain audio-video settings.
The on-screen displays disappear after about ten seconds.
Press the button once more or wait approximately 10 seconds and it disappears automatically.

Plug and Play Feature

When the TV is initially powered on, several basic settings proceed automatically and subsequently.
The following settings are available.
1. Press the POWER
The message "Plug & Play" is displayed.
2. Select the appropriate language by pressing the
Press the ENTER
3. The message "Check antenna input." is displayed with "OK" selected.
Press the ENTER
Please check that the antenna cable is connected correctly.
4. Press the
5. Press the ENTER
The channel search will start and end automatically.
After all the available channels are stored, the "Clock Set" menu appears.
Press the
6. Press the ENTER
Press the
Set the "Hour", "Minute" or "am/pm" by pressing the
7. Press the ENTER
The message "Enjoy your watching." is displayed.
Language: Select your language.
Air/Cable: Select your local cable company TV system.
Auto Program: Selects between terrestrial antenna connection or your local cable company TV system.
Clock Set: Sets the current time for the TV clock.
You can also set the hour and minute by pressing the number buttons on the remote control.
If you want to reset this feature...
1. Press the MENU button to display the menu.
Press the
2. Press the ENTER
3. This will change or reset the settings.
or VOL button to increase or decrease the volume.
button on the remote control.
button to confirm your choice.
button.
or button to select "Air", "STD", "HRC", or "IRC", then press the ENTER
button to select "Start".
ENTER
button at any time to interrupt the memorization process.
button.
or button to move to the "Hour", "Minute" or "am/pm".
button to confirm your setting.
The TV automatically cycles through all of the available channels and stores them in memory.
This takes about one to two minutes.
or button to select "Setup", then press the ENTER
button to select "Plug & Play".
English-7
or VOL button.
or button.
or button.
button.
button.